Potential Line Striping Problems To Avoid

Potential Line Striping Problems To Avoid

Most business owners take pride in maintaining the appearance of their property. But many don’t pay enough attention to their parking lots and the line striping? It’s not as straightforward as picking up a can of paint and starting painting. Potential problems can occur if you don’t know what you’re doing.

This blog post by Power Surge Plus LLC explores some of those potential problems and how to avoid them.

Poor Adhesion

One of the most common problems that can occur during line striping is poor adhesion. This happens when the paint does not adhere to the surface properly and peels or flakes off. Several factors can contribute to this, including the surface condition, the type of paint used, and the weather conditions.

Several factors can cause this, including:

  • The asphalt pavement is too cold. Line striping should only be done when the temperature exceeds 50 degrees Fahrenheit.
  • The surface was not cleaned properly before painting. Any dirt, grease, or oils will prevent the paint from adhering correctly.
  • The paint used is not made for asphalt pavement. Make sure to use paint that is specifically designed for use on asphalt.

If you are having trouble with your line striping, peeling, or flaking off, you can do a few things to help improve the adhesion. The most important thing is to make sure that the surface is clean and free of dirt, dust, or debris. You can use a pressure washer to clean the surface or sand it down with a power sander. Once the surface is clean, you should also make sure that it is dry before you start painting.


Another problem that can occur during line striping is bleeding. The diffusion or seeping of a soluble color from the substrate through the topcoat color is called bleeding. It usually happens during hot weather. This can be a safety hazard, making the lines difficult to see.

There are a few things that can be done to help prevent these problems:

  • Make sure the asphalt is at the correct temperature before painting.
  • Clean the surface thoroughly before painting.
  • Use the correct type of paint for asphalt pavement as the wrong paint can also lead to problems. It never dries out completely and is not visible enough. The wrong color starts coming off soon!

Line striping is an essential part of pavement markings and should be done correctly to avoid these potential problems. Contact a trusted asphalt paving company if you need line striping & pavement markings services.

So, are you looking for a paving company that can handle any job, big or small? Look no further than PowerSurge Plus LLC. We’re a family-owned and operated business providing quality asphalt services to residents of Philadelphia, PA, for years.

Our experienced professionals are dedicated to providing top-notch service and results, so you can rest assured knowing your project is in good hands. We offer a wide range of services, from simple repairs to complete pavement replacement, so we can take care of whatever you need. We answer every question you may have about our services or the process involved. You can request your free quote now!